Chamber cleaning system
MWS 6
Multi Washing System
CHAMBER UNIT
Short delivery time
through pre-production and stock parts
Estimated price
using a modular system
Scalable
About options
Made in Germany
In-house production, worldwide service
We are revolutionising industrial parts cleaning
Anyone seeking to achieve high throughput and the highest standards of cleanliness in industrial parts cleaning cannot afford to skimp on resources. That was the case until now. Now there is the Silberhorn MWS 6.
Silberhorn’s largest Multi Washing System (MWS) to date fundamentally redefines the concept of efficiency in parts cleaning. The system features a choice of 2, 3 or 4 tanks for different cleaning fluids. Thanks to this, and in combination with the new 8-position swivel rack, the machine achieves excellent results in terms of part cleanliness.
And it does so on a grand scale, as the Silberhorn MWS 6 accommodates XL-sized components as well as small parts in bulk – up to a maximum of 300 kg per cycle. For even higher throughput, several systems can even be set up in series and linked together if required.
However, this new development is not only efficient in terms of throughput and part integrity. The cleaning system is equipped with such innovative technology that it also leads the way in terms of sustainability. This is good for the environment, saves valuable working time and preserves your financial resources. With every cleaning cycle, every day. This makes the Silberhorn MWS 6 a true efficiency machine.
Overview
Component size & weight
- Maximum basket/component size: 800 x 600 x 400 mm
- Capacity up to 300 kg
- Simultaneous loading of two baskets, each measuring 600 x 400 x 300 mm, is possible
Cleaning system
8-way swivel register
Cleaning procedures
Spray cleaning, immersion cleaning, pressure washing, ultrasonic cleaning
Number of tanks
Up to 4 cleaning tanks with a continuously adjustable pump capacity in tank 1
Drying process
Vacuum drying, hot-air drying, pulsed compressed-air blowing
Advantages
Modular
The Silberhorn MWS is available as a 2-, 3- or 4-tank system.
Despite being mass-produced, you can customise your system to suit your specific needs with up to 40 options.Space-saving
Extremely compact design. Even the largest Silberhorn MWS fits into a 20-foot container. Floor areas at a glance:
- 2-tank system: 8.5 m²
- 3- and 4-tank systems: 10.5 m²
Intuitive
The MWS is equipped with the latest human-machine interface. The touchscreen control panel guides the machine operator systematically and intuitively through all control, process monitoring and programming functions. Furthermore, the MWS is Industry 4.0-ready as standard.
Clean
The 8-way swivel register, developed by Silberhorn and protected by a DE-GbM, guarantees the best cleaning results.
Slim
To ensure you can scale up your parts cleaning throughput as required, we have designed the Silberhorn MWS 6 to be suitable for use in series. The front dimension of the units is always 2,150 mm – regardless of whether they are the 2-, 3- or 4-tank version. This means that, regardless of the version, you can arrange the machines in a compact, space-saving line and link them together. Subsequent expansions are possible at any time.
Easy to look after
All machine components that require regular maintenance are very easy to access: these include tanks, oil separators, filters, etc.
Available
Thanks to intelligent assembly sequencing, the Silberhorn MWS boasts a record-breaking delivery time of just around 12 weeks (excluding interlinking).
Sustainable
The MWS comes as standard with a range of innovative technologies designed to ensure maximum sustainability.
LET’S TALK ABOUT YOUR CLEANING SYSTEM
Tell us which components you need to clean and what level of cleanliness you require. We’ll advise you personally and tailor the MWS chamber cleaning system precisely to your requirements.
Highlights
ONE CHAMBER, FOUR CLEANING METHODS
High-pressure cleaning
The cleaning medium is distributed evenly throughout the cleaning chamber via 4+4 registers. The additional variable component rotation ensures that every area is reached. Ideal for less complex components.
Print floods
The cleaning medium is sprayed into the filled cleaning chamber with high kinetic energy via a special pressure-flushing unit. The cleaning medium thus finds its way through narrow gaps, undercuts and cavities. The method of choice for full cleaning baskets and complex components. Produces excellent results.
Floods caused by water being scooped up
Optimised for components with complex internal geometries and high cleaning requirements. With every rotation, the cleaning fluid floods the cavities of the components and then drains out again. Dirt particles are flushed out with every rotation of the component.
Ultrasonic cleaning
The sound waves, which oscillate across various frequency ranges, support the entire cleaning process, from preliminary cleaning through to ultra-fine cleaning.
Technical specifications
=
included
=
optional
=
unavailable
MWS 6120 | MWS 6130 | MWS 6140 | |
|---|---|---|---|
| APPLICATIONS | |||
| Interim cleaning | |||
| Demanding cleaning | |||
| Ultra-precise cleaning (high-end) | |||
| CLEANING | |||
| Spray cleaning | |||
| Flood cleaning | |||
| Scoop-flood cleaning | |||
| Targeted cleaning through component positioning | |||
| 4-way register (rigid) | |||
| 8-way swivel register | |||
| Filtration for demanding cleaning | |||
| Filtration for ultra-fine cleaning | |||
| Bypass filtration | |||
| Ultrasonic cleaning | |||
| Rinse water treatment | |||
| Single-load table | |||
| Dual-load table, movable | |||
| Automatic feeding | |||
| DRYING | |||
| Pneumatic pulse drying | |||
| Targeted drying through component positioning | |||
| Combined compressed air pulse drying and hot air drying | |||
| Hot-air drying with humidity measurement | |||
| Vacuum drying in a process chamber | |||
| External vacuum drying (only with feed conveyor) | |||
| TECHNICAL DATA | |||
| Dimensions in mm (W x H x D) | 2,250 x 2,500 x 3,900 | 2,250 x 2,500 x 4,800 | 2,250 x 2,500 x 4,800 |
| Basket dimensions in mm (L x W x H) | 800 x 600 x 400 | 800 x 600 x 400 | 800 x 600 x 400 |
| Alternative basket dimensions in mm (L x W x H) | 2 x 600 x 400 x 300 | 2 pieces 600 x 400 x 300 | 2 pieces 600 x 400 x 300 |
| Other basket dimensions | on request | on request | on request |
| Weight per batch in kg | 300 | 300 | 300 |
| Weight of the plant (in tonnes) | from 4.3 | from 4.9 | from 5.0 |
| Feeding height in mm | 1,050 | 1,050 | 1,050 |
| Bath volume in litres | 1,050 + 900 | 1,050 + 900 + 900 | 1,050 + 900 + 450 + 450 |
| Electrical connected load | from 70 kW | from 85 kW | from 90 kW |
| SOFTWARE / HMI | |||
| Preset programmes (number) | 3 | 3 | 3 |
| Freely selectable programmes (number) | 20 | 20 | 20 |
| APIs / Analysis / Business Intelligence | |||
| Conductivity analysis (via probe) |
Our Services
Helpline
Do you have any questions about maintenance, programming or additional technical options for your Silberhorn MWS? We’d be happy to advise you and are here to help via the Silberhorn Hotline.
Remote maintenance
The Silberhorn MWS is inherently Industry 4.0-ready. All the necessary connections and interfaces are built in. This means that, if required, our service engineers can access your Silberhorn MWS via remote maintenance – immediately and without the need for costly travel.
Training courses
Whether virtually via a webinar or in person at your premises: we’ll equip you and your team with bespoke training so that you can get the most out of the Silberhorn MWS.
Technical Centre
Which cleaning process is the most effective for your cleanliness requirements? Let’s find out together: at the Silberhorn Technikum, which has its own testing laboratory.
LET’S DISCUSS YOUR CLEANING REQUIREMENTS
Please describe your requirements or your specific cleaning task to us – the sector, the component and the required level of cleanliness. You’ll receive a response directly from our team of experts within 24 hours.
Your direct contact:
AxelHaschkamp
Head of Sales & Marketing
DISCOVERCHAMBER CLEANING SYSTEMS
Designed for maximum efficiency and flexibility: our chamber cleaning systems adapt to your specific requirements and enable you to optimise your production processes.
BOOK A CLEANING
SERVICE
Contract component cleaning, with no capital outlay required. As a manufacturer of all types of cleaning systems, we have the expertise and a large fleet of machinery at our disposal.
